Factory Free sample Mpls Load Balancing - Mylinking™ Network Packet Broker(NPB) ML-NPB-5660 – Mylinking
Factory Free sample Mpls Load Balancing - Mylinking™ Network Packet Broker(NPB) ML-NPB-5660 – Mylinking Detail:
1- Overviews
- A full visual control of Data Acquisition/Capture NPB(6* 40GE/100GE QSFP28 slots plus 48 * 10GE/25GE SFP28 slots)
- A full pre-processing and re-distribution Packet Broker(bidrectional bandwidth 1.8Tbps)
- Tunnel Encapsulation Stripping supported, the VxLAN, VLAN, GRE, GTP, MPLS, IPIP header stripped in the original data packet and forwarded output.Supported raw packet collected, identified, analyzed, statistically summarized and marked
- Supported raw packet output for monitoring equipment of BigData Anlysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
- Supported real-time packet capture analysis, data source identification, and real-time/historical network traffic search
- Supported P4 programmable chip solution, data compilation and action execution engine system. The hardware level support the recognition of new data types and strategy execution ability after data identification, can be customized for packet identification, quick add new function, new protocol matching. It has excellent scenario adaptation ability for the new network features. For example, VxLAN, MPLS, heterogeneous encapsulation nesting, 3-layer VLAN nesting, additional hardware level timestamp, etc.

2- Intelligent Traffic Processing Abilities
3- Typical Application Structures
3.1 Centralized Collection Application(as following)

3.2 Unified Schedule Application(as following)

3.3 Data VLAN Tagged Application(as following)

3.4 Data/Packet De-duplication Application(as following)

3.5 Mylinking™ Network Packet Broker Data/Packet Masking Application(as following)

3.6 Mylinking™ Network Packet Broker Data/Packet Slicing Application(as following)

3.7 Network Traffic Data Visibility Analysis Application(as following)

4-Specifications
|
ML-NPB-5660 Mylinking™ Network Packet Broker NPB/TAP Functional Parameters |
|||
|
Network Interface |
10GE(compatible with 25G) |
48*SFP+ slots; Supports single and multi-mode optical fibers |
|
|
100G(compatible with 40G) |
6*QSFP28 slots; Support 40GE, breakout to be 4*10GE/25GE; Supports single and multi-mode optical fibers |
||
|
Out-of-Band MGT Interface |
1*10/100/1000M electrical port | ||
|
Deployment Mode |
Optical Mode |
Supported |
|
|
Mirror Span Mode |
Supported |
||
|
System Function |
Basic Traffic Processing |
Traffic Replication/aggregation/distribution |
Supported |
|
Based on IP / protocol / port seven-tuple traffic identification filtering |
Supported |
||
|
VLAN mark/replace/delete |
Supported |
||
|
Tunnel protocol identification |
Supported |
||
|
Tunnel encapsulation stripping |
Supported |
||
|
Port breakout |
Supported |
||
|
Ethernet package independence |
Supported |
||
|
Processing ability |
1.8Tbps |
||
|
Intelligent Traffic Processing |
Time-stamping |
Supported |
|
|
Tag remove, decapsulation |
Supported VxLAN, VLAN, GRE, MPLS header stripping |
||
|
Data de-duplication |
Supported interface/policy level |
||
|
Packet slicing |
Supported policy level |
||
|
Data desensitization(Data Masking) |
Supported policy level |
||
|
Tunneling protocol identification |
Supported |
||
|
Application layer protocol identification |
Supported FTP/HTTP/POP/SMTP/DNS/NTP/
BitTorrent/SYSLOG/MYSQL/MSSQL, etc. |
||
|
Video traffic identification |
Supported |
||
|
SSL decryption |
Supported |
||
|
Custom decapsulation |
Supported |
||
| Processing ability |
60Gbps |
||
|
Diagnosis and Monitoring |
Real-time monitor |
Supported interface/policy level |
|
|
Traffic alarm |
Supported interface/policy level |
||
|
Historical traffic review |
Supported interface/policy level |
||
|
Traffic capture |
Supported interface/policy level |
||
|
Traffic Visibility Detection
|
Basic Analysis |
Summary statistics are displayed based on basic information such as packet count, packet category distribution, number of session connections, and packet protocol distribution |
|
|
DPI Analysis |
Supports transport layer protocol ratio analysis; unicast broadcast multicast ratio analysis, IP traffic ratio analysis, DPI application ratio analysis. Support data content based on sampling time analysis of traffic size presentation. Supports data analysis and statistics based on session flow. |
||
|
Accurate Fault Analysis |
Supported fault analysis and location based on traffic data, including packet transmission behavior analysis, data flow level fault analysis, packet level fault analysis, security fault analysis, and network fault analysis. | ||
|
Management |
CONSOLE MGT | Supported | |
| IP/WEB MGT | Supported | ||
| SNMP MGT | Supported | ||
| TELNET/SSH MGT | Supported | ||
|
RADIUS or TACACS + Centralized authorization authentication |
Supported | ||
| SYSLOG protocol | Supported | ||
| User authentication | Based on user’s password authentication | ||
| Electric(1+1 Redundant Power System-RPS) | Rate power supply voltage |
AC110~240V/DC-48V(optional) |
|
|
Rate power supply frequency |
AC-50HZ |
||
|
Rate input current |
AC-3A / DC-10A |
||
|
Rate power |
Max 400W |
||
|
Environment |
Working temperature |
0-50℃ |
|
|
Storage temperature |
-20-70℃ |
||
|
Working humidity |
10%-95%no condensation |
||
|
User Configuration |
Console configuration | RS232 interface, 115200,8,N,1 | |
|
Password authentication |
Supported |
||
|
Height of Chassis |
Rack space (U) |
1U 445mm*44mm*402mm |
|
5-Order Information
ML-NPB-5660 6*40GE/100GE QSFP28 slots plus 48*10GE/25GE SFP28 slots, 1.8Tbps
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, usually regards product top quality as business life, repeatedly enhance manufacturing technology, make improvements to product excellent and continuously strengthen enterprise total high quality administration, in strict accordance with all the national standard ISO 9001:2000 for Factory Free sample Mpls Load Balancing - Mylinking™ Network Packet Broker(NPB) ML-NPB-5660 – Mylinking , The product will supply to all over the world, such as: Belgium, Adelaide, Liberia, Item have passed by means of the national qualified certification and been well received in our main industry. Our expert engineering team will often be ready to serve you for consultation and feedback. We have been able to also deliver you with cost-free samples to meet your specs. Ideal efforts will probably be produced to deliver you the most beneficial service and solutions. Should really you be interested in our company and solutions, please make contact with us by sending us emails or call us straight away. To be able to know our solutions and enterprise. ar more, you'll be able to come to our factory to see it. We will constantly welcome guests from all over the world to our firm. o build business enterprise. elations with us. You should feel absolutely free to speak to us for organization. nd we believe we are going to share the best trading practical experience with all our merchants.
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.




