Mylinking™ Module Transceiver Optical SFP LC-SM 1310nm 10km
ML-SFP-SX 1.25Gb/s SFP 1310nm 10km LC Single-Mode
Tilmaamaha Alaabta
● Waxa ay taageertaa 1.25Gbps/1.0625Gbps
● Xidhiidhiyaha LC Duplex
● Raadka SFP ee kulul ee la xidhi karo
1310nm FP laser gudbiyaha iyo sawir-qaade PIN
● Lagu dabaqi karo 10Km isku xirka SMF
● Isticmaalka koronto yar,<0.8W
● Interface Monitor-ka ogaanshaha Dijital ah
● U hoggaansanaanta SFP MSA iyo SFF-8472
● Aad u hooseeya EMI iyo ilaalinta ESD aad u fiican
● heerkulka kiiska shaqada:
Ganacsiga: 0 ilaa 70 °C
Warshadaha: -40 ilaa 85 °C
Codsiyada
● Gigabit Ethernet
● Kanaalka Fiberka
U beddel interface-ka beddelka
● Codsiyada diyaaradda dhabarka ee beddeshay
● Isku xirka router/server
● Hababka kale ee gudbinta indhaha
Shaxda shaqaynaysa
Qiimaynta ugu Sarreysa
| Halbeegga | Astaanta | Min. | Max. | Unug | Ogow |
| Supply Voltage | Vcc | -0.5 | 4.0 | V | |
| Heerkulka Kaydinta | TS | -40 | 85 | °C | |
| Qoyaanka Qaraabada | RH | 0 | 85 | % |
Fiiro gaar ah: Cadaadiska ka badan inta ugu badan ee qiimaynta saxda ah waxay u keeni kartaa dhaawac joogto ah qalab-qaadayaasha.
Tilmaamaha Hawlgalka Guud
| Halbeegga | Astaanta | Min. | Nooca | Max. | Unug | Ogow |
| Heerka Xogta | DR |
| 1.25 |
| Gb/s | |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Bixinta Hadda | Icc5 |
| 220 | mA | ||
| Heer kulka Dacwada | Tc | 0 | 70 | °C | ||
| TI | -40 | 85 |
Tilmaamaha Korontada (TOP(C) = 0 ilaa 70 ℃, TOP(I) =-40 to 85 ℃, VCC = 3.13 to 3.47 V)
| Halbeegga | Astaanta | Min. | Nooca | Max. | Unug | Ogow | |
| Gudbiye | |||||||
| Lulida gelinta xogta kala duwan | VIN, PP | 120 | 820 | mVpp | 1 | ||
| Tx Dami gelinta-sare | VIH | 2.0 | Vcc+0.3 | V | |||
| Tx Dami gelinta-hoose | VIL | 0 | 0.8 | V | |||
| Qaladka Tx-sare | VOH | 2.0 | Vcc+0.3 | V | 2 | ||
| Soo saarista Cilada Tx-hoose | VOL | 0 | 0.5 | V | 2 | ||
| Gelida carqaladaynta kala duwanaanta | Rin | 100 | Ω | ||||
| qaataha | |||||||
| Kala duwanaanshaha soo saarista xogta | Cod, pp | 300 | 650 | 800 | mVpp | 3 | |
| Rx LOS wax soo saarka-sare | VROH | 2.0 | Vcc+0.3 | V | 2 | ||
| Wax soo saarka Rx LOS-hoose | VROL | 0 | 0.8 | V | 2 | ||
Xusuusin:
1. TD +/- waa gudaha AC oo ay la socdaan 100Ω joojinta kala duwanaanta gudaha cutubka.
2. Tx Fault iyo Rx LOS waa wax soo saarka ururiyaha furan, kaas oo lagu jiidi karo 4.7k ilaa 10kΩ caabiyeyaasha guddiga martida loo yahay.Soo jiid danab inta u dhaxaysa 2.0V iyo Vcc+0.3V.
3. RD+/- wax soo saarku waa gudaha AC, waana in lagu joojiyo 100Ω (ka duwan) isticmaalaha SERDES.
Tilmaamaha indhaha (TOP(C) = 0 ilaa 70 ℃, TOP(I) = -40 ilaa 85 ℃,VCC = 3.13 to 3.47 V)
| Halbeegga | Astaanta | Min. | Nooca | Max. | Unug | Ogow |
| Gudbiye | ||||||
| Hirarka Mawjada | λ | 1290 | 1310 | 1330 | nm | |
| Awood wax-soo-saarka (Dartay) | WADDO | -9 | -3 | dBm | 1 | |
| Saamiga Dabar goynta | ER | 9 |
|
| dB | 1 |
| Balaadhka muuqaalka RMS | Δλ | 0.65 | nm | |||
| Wakhtiga kor u kaca/dhicista (20% ~ 80%) | Tr/Tf | 0.26 | ns | 2 | ||
| Ciqaabta kala firdhinta | TDP | 3.9 | dB | |||
| Soo saarida indhaha indhaha | U hoggaansan IEEE802.3 z (class 1 aser safe) | |||||
| qaataha | ||||||
| Hirarka Mawjada | λ |
| 1310 |
| nm | |
| Dareenka qaataha | PSEN1 | -22 | dBm | 3 | ||
| Culayska xad dhaafka ah | WADDO | 0 |
| dBm | 3 | |
| LOS caddayn | Pa | -35 | dBm | |||
| LOS De-cadeynta | Pd | -24 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 |
| dB | ||
Xusuusin:
1. Lagu cabbiray 1.25Gb/s oo leh PRBS 2 223 – 1Habka tijaabada NRZ.
2. Aan sifeynin, lagu cabiray PRBS223 – 1qaabka tijaabada @1.25Gbps
3. Lagu cabbiray 1.25Gb/s oo wata PRBS 223 – 1Habka tijaabada NRZ ee BER <1x10-12
Qeexitaannada Pin iyo Hawlaha
| Pin | Astaanta | Magaca/Sharaxaada | Xusuusin |
| 1 | VeeT | Tx dhulka |
|
| 2 | Qaladka Tx | Tilmaamaha khaladka Tx, Soo saarida Ururiyaha Furan, "H" firfircoon | 1 |
| 3 | Tx Dami | Soo gelinta LVTTL, soo-jiid gudaha ah, Tx waa la joojiyay "H" | 2 |
| 4 | MOD-DEF2 | 2 gelinta xogta interface interface serial (SDA) | 3 |
| 5 | MOD-DEF1 | 2 gelinta saacad is dhexgalka siligga ah (SCL) | 3 |
| 6 | MOD-DEF0 | Tusaalaha hadda jira | 3 |
| 7 | Qiimaynta dooro | Xiriir la'aan |
|
| 8 | LOS | Calaamadaha luminta Rx, Soo-saarka Furan ee Ururiyaha, "H" firfircoon | 4 |
| 9 | VeeR | Rx dhulka |
|
| 10 | VeeR | Rx dhulka |
|
| 11 | VeeR | Rx dhulka |
|
| 12 | RD- | Ka soo horjeeda xogta la helay | 5 |
| 13 | RD+ | Xogta la helay | 5 |
| 14 | VeeR | Rx dhulka |
|
| 15 | VccR | Korontada Rx |
|
| 16 | VccT | Korontada Tx |
|
| 17 | VeeT | Tx dhulka |
|
| 18 | TD+ | Gudbi xogta gudaha | 6 |
| 19 | TD- | Xogta gudbinta gaddoonka ah gudaha | 6 |
| 20 | VeeT | Tx dhulka |
Xusuusin:
1. Marka uu sarreeyo, soo-saarkani wuxuu muujinayaa cillad laysarka nooc ka mid ah.Hooseeyo waxay muujinaysaa hawlgal caadi ah.Oo waa in lagu soo jiid 4.7 – 10KΩ iska caabin ah oo saaran sabuuradda martida loo yahay.
2. TX disable waa galinta loo isticmaalo in lagu xidho soo saarida indhaha.Waxa lagu soo jiiday moduleka dhexdiisa oo leh 4.7 - 10KΩ iska caabin ah.Dawladdiisu waa:
Hooseeyo (0 - 0.8V): Gudbiye shid (>0.8, <2.0V): Aan la qeexin
Sare (2.0V~Vcc+0.3V): Gudbiyaha waa naafo Furan yahay: Gudbiyaha waa naafo
3. Mod-Def 0,1,2.Kuwani waa biinanka qeexida moduleka.Waa in lagu soo jiid 4.7K – 10KΩ iska caabin ah oo saaran sabuuradda martida loo yahay.Korontada soo jiidashada waa in ay u dhaxaysaa 2.0V~Vcc+0.3V.
Mod-Def 0 waxaa lagu dejiyay cutubka si loo muujiyo in cutubku jiro
Mod-Def 1 waa xariiqda saacada ee laba xidhiidhiye silig oo xidhiidhsan oo aqoonsi taxane ah
Mod-Def 2 waa xariiqda xogta ee labada xiriiriye ee silig ee aqoonsiga taxanaha ah
4. Marka uu sarreeyo, soo-saarkani wuxuu muujinayaa luminta calaamadda (LOS).Hooseeyo waxay muujinaysaa hawlgal caadi ah.
5. RD+/-: Kuwani waa soo-saarka soo-dhoweynta ee kala duwan.Waxay yihiin AC oo ku lammaan 100Ω khadadka kala duwanaanta kaas oo ay tahay in lagu joojiyo 100Ω (kala duwan) isticmaalaha SERDES.Isku xirka AC waxaa lagu sameeyaa gudaha moduleka oo sidaas loogama baahna guddiga martida loo yahay.
6. TD +/-: Kuwani waa agabka gudbinta kala duwan.Waxay yihiin AC-ku-duuban, khadadka kala duwan oo leh 100Ω joojinta kala duwanaansho gudaha cutubka.Isku xirka AC waxaa lagu sameeyaa gudaha moduleka oo sidaas loogama baahna guddiga martida loo yahay.
Tilmaamaha ogaanshaha Dijital ah
Transceivers-yada waxaa loo isticmaali karaa nidaamyada martida loo yahay ee u baahan gudaha ama dibadda baarista dhijitaalka ah.
| Halbeegga | Astaanta | Unugyo | Min. | Max. | Saxnaanta | Ogow |
| Heerkulka transcever | DTemp-E | ºC | -45 | +90 | ±5ºC | 1 |
| danab sahayda Transceiver | DVoltage | V | 2.8 | 4.0 | ± 3% |
|
| Gudbiye eexda hadda | DBIas | mA | 2 | 15 | ± 10% | 2 |
| Awood wax soo saarka gudbiyaha | DTx-Awoodda | dBm | -10 | -2 | ±3dB | |
| Celceliska awoodda wax gelinta ee qaataha | DRx-Awoodda | dBm | -25 | 0 | ±3dB |
Xusuusin:
1. Marka heerkulka shaqaynayo = 0 ~ 70 ºC, xadka wuxuu noqonayaa min = -5, Max=+75
2. Saxnaanta eexda Tx hadda waa 10% ee wakhtiga dhabta ah laga bilaabo darawalka laser ilaa laser
3. Isbeddelka Gudaha/Dibadeed waafaqi.
Wareegga Interface-ka caadiga ah
Cabbirrada Xidhmada
