Mylinking™ Network Tap ML-TAP-2610

24*GE SFP plus 2*10GE SFP+, Max 44Gbps

Short Description:

Mylinking™ Network Tap of ML-TAP-2610 has up to 44Gbps processing capacity optical splitting or mirroring span access. It supports a maximum of 2 * 10 GIGABit SFP+ slots (compatible with 1 GIGABit) and 24 * 1 gigabit SFP slots, flexible support 10G and 1G single/multi-mode optical modules and 10 gigabit and 1 gigabit electrical modules. Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, and support all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging.


Product Detail

Product Tags

1- Overviews

  • A full visibility control of network traffic collection device(2*10GE SFP+ plus 24*GE SFP ports)
  • A full Data Scheduling Management device(duplex Rx/Tx processing)
  • A full pre-processing and re-distribution device(bidirectional bandwidth 44Gbps)
  • Supported collection & reception of link data from different network element locations
  • Supported collection & reception of link data from different switch routing nodes
  • Supported raw packet collected, identified, analyzed, statistically summarized and marked
  • Supports LAN/WAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment, transport layer port range, Ethernet type field, VLANID, MPLS label, and TCPFlag fixed offset feature.
  • Supported port traffic aggregation, Hash diversion, load balancing, and filtering, flexibly meeting your network security and traffic analysis device deployment requirements.
  • Supported automatically various tunneling protocols identification such as GTP / GRE / PPTP / L2TP / PPPOE. Regarding the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel
product-description1

ML-TAP-2610

2- System Block Diagram

product-description2

Mylinking™ ML-TAP-2610 Network Tap is ASIC dedicated chip pure hardware design, high-speed backplane switching bus bandwidth up to 44Gbps, can achieve complete line speed flow collection, convergence, filtering, shunt, replication and other functions; TCAM hardware policy matching mark engine module can complete the packet security policy matching and traffic classification mark under the state of line speed flow. The traffic steering engine can implement free port forwarding, replication and shunting actions of marked traffic.

3- Operating Principle

product-description3

- The easy-to-use WEB configuration interface eliminates complex CLI configuration. Advanced users can use no more than five commands to configure the complex traffic replication in different ports.

- Status monitoring; Port status on the WEB UI displays the power supply, system status, interface rate, interface LINK status, and data packets sent and received by the port.

- Fully compatible with intrusion detection system, protocol analyzer, RMON probe, network audit system and other applications.

4- Intelligent Traffic Processing Abilities

product description

ASIC Chip Plus TCAM CPU
44Gbps intelligent traffic processing capabilities

product-description1

10GE Traffic Acquisition
10GE 2 ports, Max 2*10GE plus 24*GE ports Rx/Tx duplex processing, up to 44Gbps Traffic Data Transceiver at same time, for network Data Capture,  and simple Pre-processing

product description (2)

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

product description (3)

Data Aggregation 
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

product description (4)

Data Distribution 
Classified the incoming data accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

product description (5)

Data Filtering
Supported network L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.

product description

Load Balancing
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

product description (6)

UDF Match
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

product description (7)

VLAN Tagged

product description (8)

VLAN Untagged

product description (9)

VLAN Replaced

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

product description (10)

MAC Address Replacement
Supported the replacement of the destination MAC address in the original data packet, which can be implemented based on the user's configuration

product description (11)

3G/4G Mobile Protocol Recognition/Classification
Supported to identify mobile network elements such as (Gb, Gn, IuPS, S1-MME, S1-U, X2-U, S3, S4, S5, S6a, S11, etc. interface). You can implement traffic output policies based on features such as GTPV1-C, GTPV1-U, GTPV2-C, SCTP, and S1-AP based on user configurations.

product description (12)

Ports Healthy Detection
Supported  the real time detection of the service process health of the back-end monitoring and analysis equipment connected to different output ports. When the service process fails, the faulty device is automatically removed. After the faulty device is recovered, the system automatically returns to the load balancing group to ensure the reliability of multi-port load balancing.

product description (13)

VLAN, MPLS Untagged
Supported the VLAN, MPLS header stripping in the original data packet, and output.

product description (14)

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

product description (15)

Unified Control Platform
Supported mylinking™ Visibility Control Platform Access

product description (16)

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

5- Mylinking™ Network Tap Typical Application Structures

5.1 Mylinking™ Network Tap GE to 10GE Data Aggregation Application(as following)

product-description4

5.2  Mylinking™ Network Tap 1/10GE Data Distribution Application(as following)

product-description5

5.3 Mylinking™ Network Tap Hybrid Acquisition Application (as following)

product-description6

5.4 Mylinking™ Network Tap Customazition Traffic Monitoring Application(as following)

product-description7

6- Specifications

Mylinking™ Network Tap  NPB/TAP Functional Parameters

Network Interface

GE ports

24*GE SFP slots

10GE ports

2*10GE SFP+ slots

Deployment mode

SPAN monitoring input

support

In-line mode

support

  Total QTYs interface

26

Traffic replication / aggregation / distribution

support

Link QTYs supporting Mirror replication / aggregation

1 -> N link traffic replication (N <26)

N-> 1 link traffic aggregation (N <26)

G Group(M-> N Link) traffic replication and aggregation [G * (M + N) <26]

Functions

Distribution based on traffic identification

support

Distribution based on IP / protocol / port Five tuple traffic identification

support

Distribution strategy based on protocol header the key labeled traffic identifies

support

Strategic distribution based on deep message content identification

support

Support Ethernet encapsulation independence

support

CONSOLE Network Management

support

IP/WEB Network Management

support

SNMP V1/V2C Network Management

support

TELNET/SSH Network Management

support

SYSLOG Protocol

support

User authentication function Password authentication based on user name

Electric(1+1 Redundant Power System-RPS)

Rated supply voltage

AC110-240V/DC-48V [Optional]

Rated power frequency

AC-50HZ

Rated input current

AC-3A / DC-10A

Rated power function

150W(2401: 100W )

Environment

Operating Temperature

0-50℃

Storage Temperature

-20-70℃

Operating Humidity

10%-95%, Non-condensing

User Configuration

Console Configuration

RS232 Interface, 9600,8,N,1

Password authentication

support

Rack Height

Rack space (U)

1U 460mm*45mm*440mm

7- Order Information

ML-TAP-2401 mylinking™ Network Tap 24*GE SFP ports
ML-TAP-1410 mylinking™ Network Tap 12*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2610 mylinking™ Network Tap 24*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2810 mylinking™ Network Tap 24*GE SFP ports plus 4*10GE SFP+ ports


  • Previous:
  • Next:

  • Write your message here and send it to us