Mylinking™ Network Tap ML-TAP-2401B

16*GE 10/100/1000M BASE-T plus 8*GE SFP, Max 24Gbps, Bypass

Short Description:

Mylinking™ Network Tap of ML-TAP-2401B has up to 24Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 8 electrical links inline bypass series. Supports maximum 8 * GE SFP slots and 16 * GE electrical ports; SFP slot flexibly supports Gigabit single/multi-mode optical modules and Gigabit electrical modules. Each interface can support traffic input/output function; In the inline mode, the gigabit electrical interface adopts intelligent anti-flash break design; The inline 1G Ethernet interfaces can be configured in either inline serial mode or mirroring mode, and can be flexibly deployed according to user requirements.

Product Detail

Product Tags

1- Overviews

  • A full visual network triffc capture device with 16 * GE 10/100/1000M BASE-T ports, and 8*GE SFP slots
  • A full Data Scheduling Management device(duplex Rx/Tx processing)
  • A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps)
  • Supported capture & receive the link data from different network element locations
  • Supported collection & reception of link data from different switch routing nodes
  • Supported raw packet capture, identifie, analysis, statistically summarize and mark
  • Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packet protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
  • Supported raw packet forwarding for monitoring like BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other network traffic request
  • Supported real-time packet capture analysis, data source identification, etc.


Mylinking™ brand new Network Traffic Replication Aggregator Tap is freely directed outputs such as traffic acquisition, traffic aggregation, traffic shunting and load balancing for Gigabit Ethernet links. This network tap aggregator built in flow engine to strategic orientation, while traditional TAP network flow capture complete, all can be inline concatenated and SPAN port traffic deployment. Based on flexible control strategy oriented network packet diversion, replication, or aggregation, it can accurately forward the right traffic types, to meet all kinds of network security equipment, protocol analysis, and signal analysis, such as network traffic monitoring or security deployment requirements.

2- System Block Diagram


3- Operating Principle


4- Intelligent Traffic Processing Abilities

product description

24Gbps intelligent traffic processing capabilities


GE Traffic Capture
16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 24Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

product description (2)

Network Traffic Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

product description (3)

Network Traffic Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

product description (4)

Data Distribution and Forwording
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

product description (5)

Network Packet Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. And also supported flexible combination of filtering rules.

product description

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

product description (6)

UDF Match
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration


Smart BYPASS Function
Supported Link-Reflect and Link-SafeSwitch
enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down Ethernet Port Link status without lost.

product description (15)

Unified Control Platform
Supported mylinking™ Visibility Control Platform Access

product description (16)

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

5- Mylinking™ Network Tap Typical Application Structures

5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch(as following)


5.2 Mylinking™ Network Tap Inline Bypass Deployment Application(as following)


5.3 Mylinking™ Network Tap Hybrid Access Application(as following)


5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application(as following)


6- Specifications

Mylinking™ Network Tap NPB/TAP Functional Parameters

Network Interface GE Electrical Ports

16 ports*10/100/1000M BASE-T

SFP Slots

8*GE SFP ports, support GE Optical/Electrical Module

Deployment mode Inline mode

support max 8 routes/links *10/100/1000M BASE-T inline mode

SPAN monitoring input

support max 23*SPAN inputs

Monitoring Output

support max 23*monitoring outputs


Total QTYs interface

24 ports

Line speed process capability


Traffic replication / aggregation / distribution / forwarding / Filtering


In-line mode and SPAN monitoring


Up/Down Traffic Aggregation


Up/Down Traffic Monitoring


Distribution based on traffic identification


Distribution and Filtering based on IP / protocol / port Five tuple traffic identification


Optical interface single fiber transmission


Support Ethernet encapsulation independence


BYPASS Function(Inline mode)


BYPASS switch time(Inline mode)

< 50ms

Network Side Delay

< 100ns

LinkReflect(Inline mode)


No Flash Break when Power ON/OFF


CONSOLE Network Management


IP/WEB Network Management


SNMP V1/V2C Network Management


TELNET/SSH Network Management


SYSLOG Protocol


User authentication function Password authentication based on user name

Electric(1+1 Redundant Power System-RPS)

Rated supply voltage

AC110-240V/DC-48V (Optional)

Rated power frequency


Rated input current

AC-3A / DC-10A

Rated power function



Operating Temperature


Storage Temperature


Operating Humidity

10%-95%, Non-condensing

User Configuration

Console Configuration

RS232 interface,9600,8,N,1

Password authentication


Rack Height

Rack space (U)

1U 485mm*44.5mm*350mm

7- Order Information

ML-TAP-1201B mylinking™ Network Tap @
4*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 12Gbps

ML-TAP-1601B mylinking™ Network Tap @
8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 16Gbps

ML-TAP-2401B mylinking™ Network Tap @
16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 24Gbps

FYR: Network Traffic Data Information Insights Management

1- For Data Source

•Acquisition: SPAN/Splitter

•Related Position: XX Switch, XX Internet Link, XX Rack Position

•Related Network Topology

2- For Data Content Classify

•Business Object View, Business/Service Binding

•Data Classification Policy bind to Business Object

•Data Control Strategy Overview

•Data Slice

•Data Deduplication

•Data Masking

3- For Data Content Outgoing

•For traffic output device info management-IDS/Audit/NPM/APM

•Cover target device location information management (XX Machine Room/Rack Position/Output Point)

4- For Overall Status

•Input/Output/Internet Link Traffic Status Unified Monitoring

•Large modular screen to display traffic data information(Acquisition Point/Output point Traffic Trend, Packet Length & Type Distribution)

•Integrated traffic situation monitoring

  • Previous:
  • Next:

  • Write your message here and send it to us