Network TAP

  • Mylinking™ Network Tap ML-TAP-2810

    Mylinking™ Network Tap ML-TAP-2810

    24*GE SFP plus 4*10GE SFP+, Max 64Gbps

    Mylinking™ Network Tap of ML-TAP-2810 has up to 64Gbps processing capacity optical splitting or  mirroring span access. It supports a maximum of 4 * 10 Gigabit SFP+ slots (compatible with 1 Gigabit) and 24 * 1 gigabit SFP slots, flexible support 10G and 1G single/multi-mode optical modules and 10 gigabit and 1 Gigabit electrical modules. Supports Gigabit and 10GE Ethernet link data capture strategy, supports network traffic data packet filtering: based on quintuple (source IP, destination IP, source port, destination port, protocol), packet characteristics, deep packet content identification strategy shunt elements such as flexible combination of shunt, traffic analysis, flow filtering, Intrusion Detection System(ISD) and other application designed for the equipment level solutions.

  • Mylinking™ Network Tap ML-TAP-2610

    Mylinking™ Network Tap ML-TAP-2610

    24*GE SFP plus 2*10GE SFP+, Max 44Gbps

    Mylinking™ Network Tap of ML-TAP-2610 has up to 44Gbps processing capacity optical splitting or mirroring span access. It supports a maximum of 2 * 10 GIGABit SFP+ slots (compatible with 1 GIGABit) and 24 * 1 gigabit SFP slots, flexible support 10G and 1G single/multi-mode optical modules and 10 gigabit and 1 gigabit electrical modules. Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, and support all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging.

  • Mylinking™ Network Tap ML-TAP-2401B

    Mylinking™ Network Tap ML-TAP-2401B

    16*GE 10/100/1000M BASE-T plus 8*GE SFP, Max 24Gbps, Bypass

    Mylinking™ Network Tap of ML-TAP-2401B has up to 24Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 8 electrical links inline bypass series. Supports maximum 8 * GE SFP slots and 16 * GE electrical ports; SFP slot flexibly supports Gigabit single/multi-mode optical modules and Gigabit electrical modules. Each interface can support traffic input/output function; In the inline mode, the gigabit electrical interface adopts intelligent anti-flash break design; The inline 1G Ethernet interfaces can be configured in either inline serial mode or mirroring mode, and can be flexibly deployed according to user requirements.

  • Mylinking™ Network Tap ML-TAP-2401

    Mylinking™ Network Tap ML-TAP-2401

    24*GE SFP, Max 24Gbps

    Mylinking™ Network Tap of ML-TAP-2401 has up to 24Gbps processing capacity optical splitting or  mirroring span access. It supports a maximum 24 * 1 gigabit SFP slots, flexible supports 1G single/multi-mode optical modules and 1 gigabit electrical modules. Supports LAN/WAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment, transport layer port range, Ethernet type field, VLANID, MPLS label, and TCPFlag fixed offset feature.

  • Mylinking™ Network Tap ML-TAP-1601B

    Mylinking™ Network Tap ML-TAP-1601B

    8*GE 10/100/1000M BASE-T plus 8*GE SFP, Max 16Gbps, Bypass

    Mylinking™ Network Tap of ML-TAP-1601B has up to 16Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 4 electrical links inline bypass series. Supports maximum 8 * GE SFP slots and 8 * GE electrical ports; SFP slot flexibly supports Gigabit single/multi-mode optical modules and Gigabit electrical modules. Supports LAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment Flag, transport layer port range, Ethernet type field, VLANID, MPLS label, and TCP Flag.

  • Mylinking™ Network Tap ML-TAP-1410

    Mylinking™ Network Tap ML-TAP-1410

    12*GE SFP plus 2*10GE SFP+, Max 32Gbps

    Mylinking™ Network Tap of ML-TAP-1410 has up to 32Gbps processing capacity optical splitting or mirroring span access. It supports a maximum of 2 * 10 GIGABit SFP+ slots (compatible with 1 GIGABit) and 12 * 1 gigabit SFP slots, flexible support 10G and 1G single/multi-mode optical modules and 10 gigabit and 1 gigabit electrical modules. Supports LAN/WAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment, transport layer port range, Ethernet type field, VLANID, MPLS label, and TCPFlag fixed offset feature. Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.

  • Mylinking™ Network Tap ML-TAP-1201B

    Mylinking™ Network Tap ML-TAP-1201B

    4*GE 10/100/1000M BASE-T plus 8*GE SFP, Max 12Gbps, Bypass

    Mylinking™ Network Tap of ML-TAP-1201B has up to 12Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 2 electrical links inline bypass series. Supports maximum 4 * GE SFP slots and 8 * GE electrical ports; It’s ASIC dedicated chip pure hardware design, high-speed backplane switching bus bandwidth up to 16Gbps; TCAM hardware policy matching mark engine module can fully realize multi-port traffic aggregation, traffic filtering, traffic splitting, protocol analysis, packet depth analysis and load balancing after data collection at gigabit line speed. It provide you a convenient and efficient data collection solution.

  • Mylinking™ Network Tap ML-TAP-0801

    Mylinking™ Network Tap ML-TAP-0801

    6*GE 10/100/1000M BASE-T plus 2*GE SFP, Max 8Gbps

    Mylinking™ Network Tap of ML-TAP-0801 is a smart network traffic replicator/aggregator. In Gigabit network, committing to solving the problem of multiple devices simultaneously monitoring, can support multiple network segments, packet mode of traffic aggregation and traffic replication. By grouping configurations on the ports which can reach 1-to-many link signal copy to 1-to-many link signal capability; while the traffic between port groups can be mutually isolated; supports reverse data transmission to meet some special safety equipment requirements( such as IDS blocking function)

  • Mylinking™ Network Tap ML-TAP-0601

    Mylinking™ Network Tap ML-TAP-0601

    6*GE 10/100/1000M BASE-T, Max 6Gbps

    Mylinking™ Network Tap of ML-TAP-0601 has up to 6Gbps processing capacity. Supports optical split or mirroring span access. Supports maximum 6 Gigabit electrical ports. Supports replication, aggregation (does not support filtering and streaming).

  • Mylinking™ Network Tap ML-TAP-0501B

    Mylinking™ Network Tap ML-TAP-0501B

    5*GE 10/100/1000M BASE-T, Max 5Gbps, Bypass

    Mylinking™ Intelligent Network Copper Tap is designed for your GE Network Smart Monitoring and Security applications.

    -Supports 5 gigabit electrical interfaces, plus duplex wire-speed traffic replication capabilities.

    -Supports linkreflect features ensure routing protocol rapid aggregation.

    -Supports intelligent Bypass Technology to ensure link fast recovery

    -Supports zero configuration mode, before out of factory, having been made the functional characterics of each port.

    Supports flexible single / bi-directional network traffic replication & aggregation capabilities

  • Mylinking™ Network Tap ML-TAP-0501

    Mylinking™ Network Tap ML-TAP-0501

    5*GE 10/100/1000M BASE-T, Max 5Gbps

    Mylinking™ Network Copper Tap is designed for your GE Network Smart Monitoring and Security in span applications.

    -Supports 5 gigabit electrical interfaces,
    -Supports 1 to 4 duplex wire-speed traffic replication capabilities.
    -Supports 802.1Q traffic replication
    Supports zero configuration mode, before out of factory, having been made the functional characterics of each port.